
About Me
My name is Jon Voskinarian, I'm from Lake Hiawatha, NJ. I have been into cars and motorsports since before I got my license! I have owned and raced mainly Mazda RX-7's and Nissan 240sx's. I primarily started drag racing and while that was exciting, my friends showed me a new type of racing, drifting! When I started back in 2002ish, I was horrible. It LOOKED easy but I had no idea what I was doing. After lots of practice and help from friends, I have learned a lot and even attended a few competitions. I have participated in road race time trials, an autox, tons of drifting events/demos and drag raced many times. My current goal is to have fun driving my car and attend as many competitions as possible. Also maybe pay off a few credit cards in the process.
Tuesday, January 24, 2012
Thursday, August 11, 2011
Sunday, July 10, 2011
Thursday, June 30, 2011
Monday, May 16, 2011
Sunday, April 17, 2011
F250 Maintenance To Do List
Current Mileage: 120,000 miles
Change engine oil and replace oil filter (See Owners manual for time based oil change intervals)
Change transfer case fluid
Inspect automatic transmission fluid level (if equipped with underhood dipstick)
Inspect brake pads/shoes/rotors/drums, brake lines and hoses, and parking brake system
Inspect engine cooling system and hoses
Perform multi-point inspection
Replace PCV valve
Rotate and inspect tires; check wheel end play and turning noise
Inspect complete exhaust system and heat shields
Lubricate 4x4 front hub needle bearings
Replace engine air filter
Replace fuel filter
Inspect and lubricate all non-sealed steering linkage,ball joints,suspension joints,half and drive-shafts and u-joints
Change rear axle fluid
Change automatic transmission fluid
Can't wait!
Change engine oil and replace oil filter (See Owners manual for time based oil change intervals)
Change transfer case fluid
Inspect automatic transmission fluid level (if equipped with underhood dipstick)
Inspect brake pads/shoes/rotors/drums, brake lines and hoses, and parking brake system
Inspect engine cooling system and hoses
Perform multi-point inspection
Replace PCV valve
Rotate and inspect tires; check wheel end play and turning noise
Inspect complete exhaust system and heat shields
Lubricate 4x4 front hub needle bearings
Replace engine air filter
Replace fuel filter
Inspect and lubricate all non-sealed steering linkage,ball joints,suspension joints,half and drive-shafts and u-joints
Change rear axle fluid
Change automatic transmission fluid
Can't wait!
Saturday, April 9, 2011
Subscribe to:
Posts (Atom)




